So what can a portable power station run? Almost anything that fits inside its watt rating and its battery size. A mid-size unit handles laptops, lights, fans, a TV and a small fridge with ease, while big heat-making appliances like space heaters and hair dryers are the ones that push it over the edge.
Two numbers decide everything: the output (in watts) and the capacity (in watt-hours). Output tells you what you can plug in at the same time. Capacity tells you how long it keeps going. Let’s start with typical appliance wattage, then match it to a station.
What can a portable power station run? Common appliance wattage
Every appliance has a label or manual listing its watts. If you can’t find one, these ballpark ranges give you a good starting point. Real numbers vary by model and age, so treat them as estimates.
- Phone charger: 5 to 20 watts
- Laptop: 45 to 100 watts
- LED light bulb: 5 to 15 watts
- Box or desk fan: 30 to 75 watts
- Wi-Fi router and modem: 10 to 30 watts
- CPAP machine: 30 to 60 watts (more with a heated humidifier)
- Television: 50 to 150 watts
- Mini fridge: 50 to 100 watts while the compressor runs
- Full-size refrigerator: 100 to 250 watts while running, with a bigger jolt at startup
- Microwave: 700 to 1,200 watts
- Coffee maker: 600 to 1,200 watts
- Space heater: 750 to 1,500 watts
- Hair dryer: 1,000 to 1,800 watts
Notice the jump in the second half of that list. Anything that makes heat tends to draw a lot of power, and that’s where most “why won’t it work?” moments come from.
How to match appliances to a power station’s output
Here’s the simple rule. Add up the watts of everything you want to run at once, and make sure the total stays under the station’s continuous output rating. A unit rated for 300 watts can run a laptop, a router and a few lights together. It can’t run a microwave.
Leave some breathing room, too. Staying around 80 percent of the rated output is a sensible habit, since it keeps the unit from working at its limit and gives you a buffer if a device draws a little more than expected.
Many stations also list a surge rating. That’s a short burst of extra power, usually a second or two, that helps motors start up. It’s useful, but it doesn’t change the continuous rating you plan around.
Why motors and compressors need extra room
Anything with a motor, like a pump, a compressor or a power tool, pulls much more power for a moment when it starts. That startup surge can be two to several times its running watts.
If a station’s surge rating can’t cover that spike, the unit may shut off or trip a protection circuit. So for motor loads, check the surge figure as well as the running figure. Fridges are the classic case, and we dig into them below.
What about running time?
Once you know a device fits, the next question is how long the battery lasts. That’s a quick bit of math, and we walk through it step by step in our simple runtime formula for power stations. As a rough guide, a 500 watt-hour unit powering a 50-watt fan can run for several hours, but the same unit feeding a 1,000-watt appliance is empty in well under an hour.
Picking the right size for your situation
Start by writing down what you’d actually run, then match the station to that list. A few common setups:
- Weekend camping: phones, lights and a fan call for a small to mid-size unit. Our roundup of the best portable power stations for camping is a good place to compare sizes.
- Outage backup: a fridge, router, lights and device charging need more output and capacity. See our picks for the best portable power stations for home backup power. If the fridge is your main worry, read whether a power station can run a refrigerator first.
- General use: if you’re not sure yet, browsing the best portable power stations overall helps you see what’s out there.
Frequently asked questions
Can a portable power station run a microwave?
Yes, if its continuous output is higher than the microwave’s input watts. Check the label, since a microwave sold as 1,000 watts can draw closer to 1,500 from the wall. Runs are short, so capacity usually isn’t the problem.
Can I run a space heater on a power station?
Technically yes on a large, high-output unit, but it’s rarely a good idea. A 1,500-watt heater drains even a big battery in an hour or two, so it works best as a short boost, not a way to heat a room all night.
What happens if I plug in too much?
The station’s overload protection will usually shut the output off. Unplug a device or two, reset the unit and try again. It’s built to protect itself, but repeated overloads aren’t good for it.
The bottom line
Total the watts, stay under the output rating, and give motors extra room for startup surge. Do that and you’ll know what a power station can run before you ever plug it in. When you’re ready to shop, the camping and backup roundups above match the most common needs.

