How long will a power station last? Divide its battery capacity in watt-hours by the watts your device uses, then knock off about 15 percent for conversion losses. A 500 watt-hour unit running a 50-watt fan, for example, gives you roughly eight hours, not ten. That one formula answers most runtime questions.
It looks simple, and it really is, but the details trip people up. Let’s walk through the pieces so your estimate lands close to reality.
The basic power station runtime formula
Here’s the formula in plain steps:
- Find the battery capacity in watt-hours (Wh). It’s printed on the unit and in the specs.
- Multiply it by 0.85 to account for efficiency losses. That gives you usable watt-hours.
- Find your device’s running watts, on its label or in the manual.
- Divide usable watt-hours by device watts. The answer is hours of runtime.
Written out: runtime in hours = capacity (Wh) × 0.85 ÷ device watts. Simple enough, but why the 0.85?
Why a power station never lasts as long as the raw math says
A power station stores energy as direct current, but your wall-plug devices need alternating current. The built-in inverter that makes that switch wastes some energy as heat, and the inverter itself uses a bit of power just by being on. Add some loss in the battery’s own circuitry and you typically land at 80 to 90 percent usable energy.
The loss is bigger when you run something very small. A phone charger on the AC outlet uses the inverter for a tiny load, so a larger share of power goes to overhead. If your device has a USB or DC port option, using it skips the inverter and stretches your runtime.
Worked examples with fans, laptops and a mini fridge
Let’s use a 500 Wh station and the 0.85 factor, which gives about 425 usable watt-hours.
- A 40-watt fan: 425 ÷ 40 is a little over 10 hours.
- A 65-watt laptop charger: 425 ÷ 65 is about 6.5 hours of charging while you work. Since laptops don’t draw full power all the time, you’ll often get more.
- A mini fridge: this one is trickier, because it doesn’t run constantly. If it draws 60 watts but the compressor only runs about a third of the time, its average is roughly 20 watts, so 425 ÷ 20 gives you around 20 hours. Real fridges vary a lot, so treat this as a ballpark.
Notice how much the duty cycle matters for anything with a compressor or thermostat. For those, estimate the average draw over time, not the peak.
Other things that shorten your runtime
The formula assumes a healthy, warm battery and a steady load. Real life adds a few wrinkles:
- Cold weather: batteries deliver less capacity when it’s near or below freezing.
- Battery age: after years of use, a battery holds less than its original capacity.
- Charge level: some units shut down before showing zero, so you rarely get a true 100 to 0 swing.
- Several devices at once: add their watts together before you divide.
If you’d like a list of typical appliance wattages to plug in, our guide to what a portable power station can run has them.
Turning the formula into a shopping decision
You can also run the formula backward. Multiply the watts you need by the hours you want, then divide by 0.85. If you want to run a 40-watt fan and a 10-watt light for 12 hours, that’s 50 watts × 12 hours = 600 Wh, divided by 0.85, so you’d want a unit of at least 700 Wh.
That’s how you narrow the field fast. If you’re sizing by wattage, our guide to the best portable power stations by watt rating is a handy next step. For longer stays away from the grid, check the best portable power stations for off grid living, and for short trips see the best portable power stations for camping.
One more thing to plan for: a bigger battery takes longer to refill. We cover that in our tips on how to recharge a portable power station faster.
Frequently asked questions
How many watt-hours do I need for one night?
Add up the watts of what you’ll run, multiply by the hours, and divide by 0.85. A fan and a phone charger overnight might need only a few hundred watt-hours, while a CPAP machine is often in the same range.
Is the 0.85 number exact?
No, it’s a safe rule of thumb. Efficiency usually falls between 80 and 90 percent depending on the unit and the load, so 0.85 keeps your estimate honest without being too gloomy.
Does a bigger watt rating mean longer runtime?
Not by itself. Watts tell you how much a unit can power at once, while watt-hours tell you how long it lasts. Check both numbers before you decide.
The bottom line
For a power station runtime estimate, remember this: capacity × 0.85 ÷ watts. Use average draw for fridges and other cycling devices, and add a safety margin for cold weather and aging batteries. With that, you can size a station for nearly any plan.

