Choosing the best indoor gas fireplace insert starts with more than heat output: you also need the right fuel, a suitable location, and a design that meets local rules. The three options below are vent-free models, so they do not use an outside chimney or duct. That can make installation more flexible, but vent-free gas appliances are not permitted in every area. Check local codes and the manufacturer’s installation instructions before you buy.
Quick Comparison
| Product | Fuel | Heat output | Notable feature |
|---|---|---|---|
| Duluth Forge Dual Fuel 32,000 BTU Insert | Natural gas or propane | 32,000 BTU; listed for up to 1,500 sq. ft. | Remote control and manual flame adjustment |
| Duluth Forge Natural Gas 26,000 BTU Insert | Natural gas | 26,000 BTU; listed for up to 1,350 sq. ft. | Remote with room-temperature setting |
| ProCom Dual Fuel 15,000 BTU Insert | Natural gas or propane | 15,000 BTU; listed for up to 800 sq. ft. | Thermostat control and arched design |
Our Picks: Best Indoor Gas Fireplace Insert reviews
Best for Flexible Fuel and Higher Heat: Duluth Forge 32,000 BTU
The Duluth Forge FDI32R is the most powerful option in this group. Its dual-fuel system is designed to run on either natural gas or liquid propane, which may suit homes where fuel access could change or where only one of those sources is available. The product listing gives its output as 32,000 BTU and its heating coverage as up to 1,500 square feet.
A remote controls the burner on and off, and the unit also has manual flame adjustment. The design includes nine hand-painted ceramic fiber logs and a mesh screen. At 88.2 pounds, it is a substantial appliance, so plan for safe handling and a suitable installation area rather than treating it like a lightweight decorative insert.
Check the dimensions carefully before you commit: the listed size is 18.38 inches high, 33.27 inches wide, and 36.38 inches deep. The listing also specifies at least 42 inches of clearance from the top of the fireplace to the ceiling. Its zero-clearance firebox description does not remove the need to follow all stated clearances, installation requirements, and local rules. Because it is vent-free, verify that this type of appliance is allowed for your location and intended room.
This is the strongest match for shoppers who want fuel flexibility and the highest listed heat output among these picks. Its size and output may be more than you need for a smaller room, and a dual-fuel appliance still needs to be configured for the correct fuel and installed according to the instructions.
Pros:
- Can use natural gas or liquid propane
- Highest listed heat output and coverage in this comparison
- Includes a remote and manual flame adjustment
- Comes with nine ceramic fiber logs and a mesh screen
Cons:
- Its listed dimensions and weight call for careful fit and handling checks
- Vent-free operation may not be permitted in every location
Verdict: Choose the FDI32R if you need its higher output and dual-fuel flexibility, and have confirmed the unit’s size, clearances, and vent-free use are appropriate for your home.
Best Natural-Gas Pick with Temperature Control: Duluth Forge 26,000 BTU
The Duluth Forge FNF300R is a natural-gas-only vent-free model with 26,000 BTU of output. Its listed coverage is up to 1,350 square feet, placing it between the higher-output FDI32R and the smaller ProCom option. The zero-clearance design is described as suitable for a flush wall installation or pairing with a mantel, which gives you more than one way to plan its look.
The included remote handles on/off operation and lets you set a desired room temperature. That temperature control is useful if you want the appliance to manage heat rather than relying only on manual flame adjustment. The set includes five hand-painted ceramic fiber logs and a dual precision ported burner.
The main limitation is fuel choice: this model is specified for natural gas, not propane. Its listed heating coverage is not a guarantee of comfort in every home; room layout, insulation, ceiling height, and climate can affect how much heat a space needs. The product description lists an oxygen depletion sensor and automatic shutoff, but these features do not replace correct installation, following the manual, or having working carbon monoxide alarms as required for your home.
Compared with the 32,000 BTU Duluth Forge, this model offers less output and does not provide dual-fuel flexibility. In return, it may be a better fit if your home uses natural gas and you value remote temperature setting in a somewhat lower-output unit.
Pros:
- Remote includes on/off and room-temperature controls
- Natural-gas design with listed coverage up to 1,350 square feet
- Zero-clearance design can suit a flush wall or mantel setup
- Includes five ceramic fiber logs
Cons:
- Does not offer propane as a fuel option
- Actual room comfort can differ from the listed coverage
Verdict: Pick the FNF300R if you have natural gas, want remote temperature control, and do not need the higher output or fuel flexibility of the larger Duluth Forge model.
Best Lower-Output Dual-Fuel Option: ProCom 15,000 BTU
The ProCom PCS150T is a lower-output choice, rated at up to 15,000 BTU and listed for spaces up to 800 square feet. It uses dual-fuel technology for natural gas or liquid propane, and a variable thermostat control cycles the burner to help maintain the selected temperature. That makes it worth considering for a smaller area where the larger models may provide more heat than you need.
Its five hand-painted logs and arched design give it a different look from the two Duluth Forge options. The listing also describes a battery-assisted Piezo ignition and an oxygen depletion sensor. As with any gas appliance, follow the product instructions and local requirements; a built-in safety feature is not a substitute for proper installation or household carbon monoxide alarms.
The main trade-off is capacity. Its listed output and coverage are the lowest in this group, so it is not the pick for shoppers seeking the most heat. The supplied listing information marks this model as unavailable, so confirm current availability before making plans around it. Availability can change.
Pros:
- Uses either natural gas or liquid propane
- Thermostat control cycles the burner to maintain a selected temperature
- Lower listed output may suit a smaller space
- Distinctive arched design with five hand-painted logs
Cons:
- Lowest listed heat output and coverage among these picks
- Supplied listing information marks it as unavailable; confirm before shopping
Verdict: Consider the PCS150T for a smaller room where dual-fuel operation and thermostat control matter, but verify availability and make sure its lower output is suitable for your space.
How to Choose an Indoor Gas Fireplace Insert
Confirm That Vent-Free Operation Is Allowed
All three products here are described as vent-free, meaning they do not require an outside chimney or duct for operation. Rules for vent-free gas appliances vary by location and may also depend on the room and installation. Check with your local building department and read the manufacturer’s instructions before choosing a model. If vent-free appliances are not allowed where you live, these picks may not be suitable.
Match the Fuel to Your Home
The FDI32R and ProCom PCS150T are listed as dual-fuel models for natural gas or liquid propane. The FNF300R is specified for natural gas only. Choose based on the fuel supply you actually have and can safely connect. Do not assume a model can be switched between fuels without the required setup; confirm fuel configuration and installation details in the product documentation.
Size the Heat Output to the Room
Compare both BTU output and the manufacturer’s stated coverage: the listed ranges here are up to 800, 1,350, and 1,500 square feet. Those figures are guidelines, not a promise that the unit will heat every home equally. Insulation, room layout, ceiling height, and climate can all affect heating needs. If you are unsure, ask a qualified heating professional to help determine an appropriate output.
Measure the Opening and Installation Area
Before ordering, measure the planned opening or wall area and compare it with the appliance’s full dimensions, including depth. The FDI32R’s listing gives dimensions of 18.38 inches high, 33.27 inches wide, and 36.38 inches deep, plus a minimum 42-inch clearance from the top of the fireplace to the ceiling. Check every required clearance, access point, and installation condition for the model you choose. “Zero clearance” does not mean you can ignore the manufacturer’s requirements.
Choose Controls You Will Use
Remote features differ. The 32,000 BTU Duluth Forge includes on/off remote operation and manual flame adjustment. The 26,000 BTU model’s remote also lets you set a desired room temperature. The ProCom uses a variable thermostat control. Think about whether you want basic remote operation, temperature setting, or a thermostat that cycles the burner.
Check Safety and Installation Requirements
These products are gas-burning appliances, so plan for a proper gas connection and installation that follows the manual and local codes. The listings describe safety features such as an oxygen depletion sensor, automatic shutoff, or Piezo ignition, depending on the model. Those features do not replace correct setup, routine attention to the appliance, or working carbon monoxide alarms. Use a qualified professional if you are not equipped to assess or complete the installation safely.
Frequently Asked Questions
Do these fireplace inserts need a chimney?
The three models in this comparison are described as vent-free and do not require an outside chimney or duct. However, vent-free appliances are not permitted everywhere. Confirm local rules and the product’s installation requirements before buying.
Can I use propane with any of these models?
The Duluth Forge FDI32R and ProCom PCS150T are listed as dual-fuel models for natural gas or liquid propane. The Duluth Forge FNF300R is listed for natural gas only. Confirm the correct fuel setup in the manufacturer’s instructions.
Which option has the highest heat output?
The Duluth Forge FDI32R has the highest listed output at 32,000 BTU, with stated coverage of up to 1,500 square feet. The right output for your home depends on the room and its heating needs, not just the maximum coverage figure.
What does zero-clearance design mean?
It describes an installation design intended to allow placement flush with or near a wall, as specified for the model. It does not remove the need to meet the appliance’s clearances, installation instructions, and local building rules.
Can a vent-free fireplace replace my home’s main heating system?
The product descriptions provide heating output and estimated coverage, but they do not establish that these units can serve as a home’s primary heating system. Consider the unit’s capacity, your home’s needs, and local requirements, and consult a qualified heating professional if you need whole-home heating guidance.
Are the safety features a substitute for a carbon monoxide alarm?
No. Features such as an oxygen depletion sensor or automatic shutoff do not replace working carbon monoxide alarms. Follow local alarm requirements and the appliance manufacturer’s safety instructions.
Final Recommendation
For the most heat and the choice of natural gas or propane, the Duluth Forge FDI32R is the leading option in this comparison, provided its large dimensions and installation requirements suit your home. Choose the 26,000 BTU Duluth Forge if you use natural gas and want remote temperature control. The ProCom PCS150T is a lower-output dual-fuel alternative for smaller spaces, but check its availability before making it your plan. For any of these vent-free models, confirm local approval and safe installation before purchase.

