The easiest way to put on a duvet cover is to turn the cover inside out, grab the insert’s corners through it and shake everything right side out. Another popular trick is the roll method, where you roll the insert like a burrito and unroll it inside the cover. Both take only a couple of minutes.
If you’ve ever ended up inside a duvet cover, wrestling with it, you’re not alone. A few small tricks make the job much easier.
Before you start
Lay your cover flat on the bed, with the opening at the foot. Check that it’s the right size for the insert, since a cover that’s too small makes the job far harder. Also find the ties or loops inside the cover’s corners, if it has them, because you’ll use those later.
The burrito (roll) method
This one is a favorite because it feels almost too easy.
- Turn the cover inside out and lay it flat, opening toward you.
- Lay the duvet insert on top, lining up the corners.
- Starting at the head end, roll both layers together toward the opening, like a burrito.
- Reach into the open end of the cover and pull it over the roll, folding it back like a sleeve.
- Fasten the opening, then unroll everything, and give it a good shake.
It works best when the cover opening is wide enough to fit your arm and the rolled insert.
The corner grab (shake) method
Prefer something quick? This approach needs no rolling.
- Turn the cover inside out and reach in through the opening.
- Grab the two top corners of the cover from the inside.
- With your hands still in those corners, pick up the matching corners of the insert through the opening.
- Hold tight, and shake the cover down over the insert until it falls into place.
- Repeat for the bottom corners if needed, then fasten the opening.
It’s faster for lighter inserts, though a bulky one can be a bit of a workout.
Stop the insert from bunching
Here’s the thing that annoys most people. Once the cover is on, the insert slides around and ends up in lumps in one corner. That’s where corner ties come in.
- Use the ties sewn inside the cover to fasten to the loops on the insert. If there are no loops, you can sew a small tab to each corner or use safety clips.
- Choose a cover that’s close to the size of the insert, with only a small bit of extra room.
- Shake the duvet out well after putting it on, and smooth it from the middle outward.
A tied corner stays put through the night and through the wash, so it’s worth the extra minute.
Common mistakes to avoid
The biggest slip-up is putting the cover on right side out and trying to stuff the insert in from the opening. That’s the struggle you want to skip. Another is choosing a cover that’s far larger than the insert, which leaves empty space and causes lumps.
Take care with zippers and buttons, too. Fasten them fully so the insert doesn’t poke out, and don’t yank on them if they stick.
Making it easier next time
A few habits take the pain out of the job for good. Fold the insert in thirds lengthwise before you start, so it’s narrow and easy to handle. Do the job on the bed, or on a clean floor, so you’ve got room to spread everything out.
It also helps to have a second person for large sizes. One holds the cover open while the other feeds in the insert, and it cuts the work roughly in half.
Choosing a cover that’s easy to live with
A cover that’s easy to put on is one you’ll wash more often. Buttons, zippers and snaps each have strengths, and a wide opening makes everything simpler.
If you’re shopping, our guide to the best hotel style duvet covers highlights ones with sturdy closures, and the best linen duvet covers are an option if you like a relaxed, rumpled look. If you’re pairing it with a set, check the best cotton king comforter sets too. Not sure about the difference between insert and cover? Our explainer on duvet vs comforter clears it up.
Frequently asked questions
What’s the fastest way to put on a duvet cover?
For most people it’s the burrito or the corner grab method. Both avoid the struggle of pulling the cover over a floppy insert.
How do you keep a duvet from sliding inside the cover?
Use corner ties or loops, and pick a cover that matches the insert size. Smoothing the duvet after putting it on also helps.
Do you need to iron a duvet cover?
No, though a quick tumble in the dryer can smooth wrinkles. Take the cover out while it’s still slightly warm and put it on right away.
The bottom line
When you want to put on a duvet cover without a fight, use the burrito method or the corner grab, then tie the corners. Once you’ve done it a couple of times, it’ll take less than five minutes.

