A motorized 120-inch projector screen can give your movie room, office, or classroom a large viewing surface that rolls away when you’re done. The right choice depends on more than screen size: check the viewing format, available mounting space, controls, and power access before you buy. These five options offer different combinations of remote control, screen material, mounting flexibility, and setup features.
Quick Comparison: Motorized 120-Inch Projector Screens
| Product | Notable features | Best suited for |
|---|---|---|
| DINAH 120-Inch Electric Projector Screen | Remote-controlled drop-down design; listed for 4K and 3D projection | Simple home or presentation setups |
| SiliBamb 120-Inch Motorized Screen | 16:9 format; 104.8 × 58.7-inch view area; 1.1 gain | Home, school, or office use |
| Kayle 120-Inch Motorized Screen | 16:9 format; 1.2 gain; RF remote and wall switch | Those who want multiple control options |
| MageScreen 120-Inch Motorized Screen | 16:9 format; 1.2 gain; RF remote and wall control | Rooms where mounting clearance matters |
| WASJOYE 120-Inch Motorized Screen | Dual-side power inlets; 1.2 gain; inching mode | Installations with limited wiring options |
Our Picks: Best projector screens motorized 120 inch reviews
DINAH 120-Inch Electric Screen for Straightforward Remote Operation
The DINAH is a motorized drop-down screen designed to lower from a wall or ceiling and retract when it’s not in use. Its 120-inch size is aimed at larger viewing setups, while the included remote lets you operate it without reaching for the screen housing.
The listing describes the screen as suitable for 4K, 3D, and HD projection, but it does not provide a viewing ratio or exact image-area dimensions. That makes it especially important to confirm the screen’s measurements and format before planning a fixed installation around it. The product description also emphasizes a space-saving setup for home theaters, offices, and classrooms.
This is a reasonable option if you want basic motorized operation and don’t need detailed material or gain specifications to make your decision. Compared with the other picks, it has fewer published technical details, so shoppers who want to match a precise 16:9 image area may prefer a model with dimensions listed upfront.
Pros:
- 120-inch screen with included remote control.
- Motorized drop-down design retracts when not in use.
- Listed as suitable for 4K, 3D, and HD projection.
Cons:
- The listing does not specify the viewing area dimensions or aspect ratio.
- Screen gain and viewing angle are not provided.
Verdict: Choose the DINAH if you want a simple remote-controlled screen, but confirm its image dimensions and format before installation.
SiliBamb 120-Inch 16:9 Screen with a Defined Viewing Area
The SiliBamb offers a 120-inch diagonal viewing area in a 16:9 format, with a listed image area of 104.8 inches wide by 58.7 inches high. Those measurements make it easier to plan for a widescreen movie setup than with models that give only a diagonal size.
Its matte white PVC surface is listed at 1.1 gain with a 160-degree viewing angle. The screen is controlled by an RF remote or an integrated switch, and its metal casing is designed for wall or ceiling mounting. The product is described for use with LED, LCD, and DLP projectors, as well as for presentations and movie screenings.
The 1.1 gain specification is lower than the 1.2 gain listed for several alternatives here, though gain alone does not determine picture quality. Consider the SiliBamb if you value clearly stated dimensions and a standard widescreen format. If you need multiple control methods or a wider stated viewing angle, compare it with the Kayle or MageScreen.
Pros:
- 16:9 viewing format with listed image dimensions.
- RF remote and integrated switch provide two control options.
- Metal casing is designed for wall or ceiling installation.
- Listed 160-degree viewing angle.
Cons:
- Its listed 1.1 gain is lower than the 1.2 gain of some alternatives.
- Installation still requires checking the casing and mounting space in your room.
Verdict: The SiliBamb is a practical pick if you want a conventional 16:9 screen with its viewing-area dimensions spelled out.
Kayle 120-Inch Screen with RF Remote and Wall Switch
The Kayle is a 120-inch motorized screen with a 16:9 viewing format, a common match for widescreen video. Its listed screen surface has 1.2 gain and a 180-degree viewing angle, and the product description says it is suitable for 4K Ultra HD and active 3D projection.
For control, it includes RF remotes and a detachable three-way wall switch. That combination can be useful if you want to operate the screen from a seat or use a wall control in a presentation room. The screen arrives assembled and is described as ready to plug in, with a metal casing and installation kit for wall or ceiling mounting.
Unlike the SiliBamb, the supplied details do not give the Kayle’s exact viewing-area width and height. Measure your available space and check the final dimensions before choosing a mounting location. Its combination of remote and wall control may suit a room where more than one person needs to operate the screen.
Pros:
- 16:9 format with a listed 1.2 gain and 180-degree viewing angle.
- Includes RF remotes and a detachable wall switch.
- Arrives assembled, with an installation kit listed.
- Designed for wall or ceiling mounting.
Cons:
- Exact viewing-area dimensions are not specified in the supplied product details.
- Check the included mounting setup against your room and mounting surface.
Verdict: Pick the Kayle if you want a 16:9 screen with both remote and wall-switch control, and verify its dimensions before ordering.
MageScreen 120-Inch Screen with Position-Stop RF Control
The MageScreen is a 120-inch diagonal, 16:9 motorized screen with a matte white vinyl surface, listed at 1.2 gain and a 175-degree viewing angle. Its description also specifies black-backed fabric and four-sided black borders, features intended to help limit light passing through the screen and define the image area.
Its RF remote can stop the screen before it is fully lowered, and a wall-mounted control panel is included. The listed motor operates below 42 dB. The dual-side power inlet may also give you more flexibility when planning cable access, but you should still check the actual room layout and installation instructions.
One important planning detail is the overall frame size: the product listing gives 116 by 74.4 inches, even though the diagonal viewing area is described as 120 inches. Measure the full mounting area, not just the projected image, and follow the stated requirement to anchor to wood studs or concrete. Drywall alone is not supported for mounting.
Pros:
- 16:9 format with listed 1.2 gain and 175-degree viewing angle.
- RF remote can stop the screen at a chosen position.
- Includes a wall control panel and dual-side power inlet.
- Full frame dimensions and mounting guidance are provided.
Cons:
- The 116 × 74.4-inch overall frame needs substantial mounting space.
- Mounting to drywall alone is not supported.
Verdict: The MageScreen is a strong fit if you want position-stop control and can securely mount its larger frame to a suitable surface.
WASJOYE 120-Inch Screen with Dual-Side Power and Inching Mode
The WASJOYE is a 120-inch diagonal motorized screen with a 16:9 format. Its product information lists an image area of 104.72 inches wide by 70.47 inches high, so double-check those measurements against the dimensions of your room and projector image before purchasing.
It has a four-layer PVC matte surface, listed at 1.2 gain and a 178-degree viewing angle, with a black backing intended to limit light penetration. A long-range RF remote and wall-mounted control panel are included, and the remote can stop the screen before it is fully lowered. The inching mode is designed to move the screen a short distance when you press up or down.
The power inlets on both ends can help when the nearest power source or wiring route is not on the side you expected. The product description says two people are required for installation, so plan for help rather than treating this as a one-person setup. Compared with the MageScreen, the WASJOYE highlights dual-side power and inching mode, while the MageScreen provides a stated overall frame measurement.
Pros:
- Power inlets on both ends can offer more wiring flexibility.
- Inching mode provides short, controlled movement.
- Includes an RF remote and wall-mounted control panel.
- Listed 1.2 gain and 178-degree viewing angle.
Cons:
- The listing calls for two people to install it.
- Confirm the supplied image dimensions and full housing size for your space.
Verdict: Choose the WASJOYE if dual-side power access and fine screen-position control are priorities, and arrange a two-person installation.
How to Choose a Motorized 120-Inch Projector Screen
Check the viewing format and image dimensions
A 120-inch diagonal measurement does not tell you the screen’s full width and height. For a 16:9 screen, compare the listed viewing-area dimensions with your projector’s native format and the wall space available. Also distinguish the viewing area from the outer housing or frame, which can be larger. If the listing does not give exact dimensions, verify them before planning a permanent mount.
Measure the mounting location
Measure the full space where the screen will sit, including the casing and any clearance needed for the screen to descend. Decide whether wall or ceiling mounting makes more sense for your room, and check what mounting hardware is included. For heavier housings, use a suitable support surface and follow the manufacturer’s installation directions; do not assume drywall alone can hold the screen.
Plan for power and controls
Motorized screens need access to power, so consider where the outlet is and how the cord will reach it before installing. A remote is useful when you want to operate the screen from your seat, while a wall switch can be handy in an office or classroom. Some options also list power inlets on both ends, remote position stops, or inching modes. Choose controls that suit how you’ll use the room.
Understand gain and viewing angle
Gain and viewing angle are useful points of comparison, but they should not be treated as a complete measure of picture quality. The screens in this selection list gain values from 1.1 to 1.2, with stated viewing angles ranging from 160 to 180 degrees where provided. Think about where people will sit and how much control you have over room lighting, then compare the screen’s specifications with your projector and seating arrangement.
Match the surface to your projector and room
Several options list matte white PVC or vinyl surfaces and describe compatibility with HD, 4K, or 3D projection. Check the product details against your projector’s format and the type of content you watch. Black backing and masking borders are included on some models, but those features do not remove the need to manage ambient light in the room.
Consider installation and everyday use
A motorized screen saves you from manually pulling it down, but it still needs careful installation and a clear path to extend and retract. Some listings say the screen arrives assembled, while the WASJOYE listing recommends two people for installation. Look at the casing size, included controls, mounting requirements, and available installation help before making your choice.
Frequently Asked Questions
Is a 120-inch projector screen too large for a small room?
It depends on your viewing distance, projector setup, and available wall space. The MageScreen listing recommends viewing from 10 to 12 feet. For any model, check the full image and housing dimensions and make sure the screen can descend without hitting furniture or fixtures.
What does 120 inches mean on a projector screen?
It usually refers to the diagonal measurement of the viewing area, not the screen’s width. The housing or frame can be larger than the viewing area. Check both measurements when you plan your installation.
Can these screens be mounted on a wall or ceiling?
Several products in this selection are described for wall or ceiling mounting. The exact brackets and mounting requirements vary, so check the product instructions and use a suitable support surface. The MageScreen listing specifically says to anchor to wood studs or concrete and does not support drywall-only mounting.
Do motorized projector screens include a remote?
All five options in this selection list remote control. Some also include a wall switch or control panel, while the WASJOYE lists an inching mode and the MageScreen says its remote can stop the screen before full extension.
Do I need a 16:9 screen for movies?
Many common movie and video setups use a widescreen format, and several picks here are listed as 16:9. Check your projector’s native aspect ratio and the format of the content you plan to watch to avoid unused screen space or cropping.
Can a motorized projector screen be used outdoors?
Some product descriptions mention outdoor movie use, but the supplied information does not establish weather resistance. Treat these as indoor screens unless the manufacturer confirms that a specific model is suitable for your outdoor conditions. A covered location does not automatically make an indoor screen weatherproof.
Final Recommendation
For a straightforward choice with clearly stated 16:9 viewing dimensions, consider the SiliBamb. The Kayle offers both remote and wall-switch control, while the MageScreen stands out for its position-stop remote and stated frame dimensions. If wiring flexibility is the priority, the WASJOYE lists power inlets on both ends. Whichever you choose, verify the full screen and housing measurements, power access, and mounting requirements before ordering.

